Instillation instructions for installing 99-05 Chevy armrest.
Click on photos to enlarge
Retainer being removed
with a curved tool
with a curved tool
Stretch material around the
shaft so you can get to the
retainer in the rear
shaft so you can get to the
retainer in the rear
Closeup of the retainer
installed
installed
Retainer being removed with
needle nose pliers
needle nose pliers
Photo of bracket with
retainer in place
retainer in place
Photo of the retainer
that holds armrest
that holds armrest
Photo of small oring
sometimes holding tne
bottom of retainer
sometimes holding tne
bottom of retainer
| J & D Upholstery & Supply 1-662-335-9461 Auto Interior & Interior Supply |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
frame with a retainer on the back side.In order to get to the retainer you must pull the
material back around the metal bracket and reach behind the bracket with a pair of clip
out the armrest comes straight out.Then install the clip back in the frame first and push
the new armrest.Some of the clips have a small rubber oring retainer on the bottom
edge also...either case you all that is necessary is just pull up on the retainer and the
armrest will come out.
material back around the metal bracket and reach behind the bracket with a pair of clip
out the armrest comes straight out.Then install the clip back in the frame first and push
the new armrest.Some of the clips have a small rubber oring retainer on the bottom
edge also...either case you all that is necessary is just pull up on the retainer and the
armrest will come out.